A long solenoid of diameter 0.1 m has 2x104 turn per meter. At the centre of the solenoid, a coil of 100 turns and radius 0.01 m is placed with its axis coinciding with the solenoid axis. The current in the solenoid reduces at a constant rate to 0A from 4A in 0.05 s. If the resistance of the coil is 10π2Ω, the total charge flowing through the coil during this time is - VgyanHub

Question:

A long solenoid of diameter 0.1 m has 2×104 turn per meter. At the centre of the solenoid, a coil of 100 turns and radius 0.01 m is placed with its axis coinciding with the solenoid axis. The current in the solenoid reduces at a constant rate to 0A from 4A in 0.05 s. If the resistance of the coil is 10π2Ω, the total charge flowing through the coil during this time is

Options :

(a) 32пμС
(b) 16uC
(c) 32μС
(d) 16пuC

Answer :

(c) 32μС

Answer Steps :

Step 2:

Step 3:

Step 4:

Step 5:

Video Tutorial

Related Questions

An alternating voltage source is connected in series with a resistance R and an inductance L. If the potential drop across the resistance is 200 V and across the inductance is 150 V, then the applied voltage is:

A 1 µF condenser is charged to 50 V. The charging battery is then disconnected and a 10 mH coil is connected across the capacitor so that LC oscillations occur. What is the maximum current in the coil ? Assume that the circuit contains no resistance. The capacity of a pure capacitor is 1 F. In d.c. circuits, its effective resistance will be

In an a. c. circuit the instantaneous current and e.m.f. are represented as: I = I0 sin(ωt – π/6) and E = E0 sin(ωt + π /3) respectively. The voltage leads the current by

Explore Our Courses